Model: SBM1261
HOSE TAIL CONNECTOR BRASS 1/4M X 13MM....
R 60.20
Ex VAT:R 52.35
Model: SBM1261P
HOSE TAIL CONNECTOR BRASS 1/4M X 13MM 1PC PACK....
R 61.30
Ex VAT:R 53.30
Model: SD40R-1
Pressure gauge - 1/8 BSP Rear
The pressure gauge is an instrument showing the pressure in a pneumatic system.
Dial diameter: &O/;40mm
Pressure range: 0 - 16Bar
Thread: 1/8 BSP
Position: Rear
BSP: British St&ard Pipe thread....
R 237.76
Ex VAT:R 206.75
Model: SD40R-2
Pressure gauge - 1/4 BSP Rear
The pressure gauge is an instrument showing the pressure in a pneumatic system.
Dial diameter: &O/;40mm
Pressure range: 0 - 16Bar
Thread: 1/4 BSP
Position: Rear
BSP: British St&ard Pipe thread....
R 230.86
Ex VAT:R 200.75
Model: SD42001
Pressure switch - One way, single phase
The pressure switch is used to start & stop a compressor to maintain pressure in a pneumatic system.
Voltage: Single phase
Unloader connection Push-in (nylon tube)
Thread: 1/4 BSP
Ports: One..
R 603.69
Ex VAT:R 524.95
Model: SD42002
Pressure switch - Four way, single phase
The pressure switch is used to start & stop a compressor to maintain pressure in a pneumatic system.
Voltage: Single phase
Unloader connection Push-in (nylon tube)
Thread: 1/4 BSP
Ports: Fo..
R 613.99
Ex VAT:R 533.90
Model: SD42003
Pressure switch - One way, single phase
The pressure switch is used to start & stop a compressor to maintain pressure in a pneumatic system.
Voltage: Single phase
Unloader connection Brass ferrule
Thread: 1/4 BSP
Ports: One way
P..
R 596.74
Ex VAT:R 518.90
Model: SD42004
Pressure switch - Four way, single phase
The pressure switch is used to start & stop a compressor to maintain pressure in a pneumatic system.
Voltage: Single phase
Unloader connection Brass ferrule
Thread: 1/4 BSP
Ports: Four way
..
R 613.99
Ex VAT:R 533.90
Model: SD42005
Pressure switch - One way, three phase
The pressure switch is used to start & stop a compressor to maintain pressure in a pneumatic system.
Voltage: Three phase
Unloader connection Brass ferrule
Thread: 1/4 BSP
Ports: One way
Pre..
R 778.09
Ex VAT:R 676.60
Model: SD42006
Pressure switch - Four way, three phase
The pressure switch is used to start & stop a compressor to maintain pressure in a pneumatic system.
Voltage: Three phase
Unloader connection Brass ferrule
Thread: 1/4 BSP
Ports: Four way
P..
R 790.17
Ex VAT:R 687.10
Model: SD50R-1
Pressure gauge - 1/8 BSP Rear
The pressure gauge is an instrument showing the pressure in a pneumatic system.
Dial diameter: &O/;50mm
Pressure range: 0 - 16Bar
Thread: 1/8 BSP
Position: Rear
BSP: Brittish St&ard Pipe thread....
R 254.78
Ex VAT:R 221.55
Model: SD50R-2
Pressure gauge - 1/4 BSP Rear
The pressure gauge is an instrument showing the pressure in a pneumatic system.
Dial diameter: &O/;50mm
Pressure range: 0 - 16Bar
Thread: 1/4 BSP
Position: Rear
BSP: Brittish St&ard Pipe thread....
R 254.78
Ex VAT:R 221.55