Model: SG H827
AirCraft Spray Gun Hvlp 1.4mm Nozzle 600cc Plastic Cup
At a Glance; HVLP gravity feed spray gun with 1.4mm nozzle and 600cc plastic cup for smooth, controlled finishing
HVLP is all about efficiency: more coating on the surface, less floating ar..
R 454.83
Ex VAT:R 395.50
Model: SG H827-01
AirCraft Spray Gun HVLP 1.7mm Nozzle 600cc Plastic Cup (SG H827-01)
At a Glance: 1.7mm HVLP nozzle with a 600cc gravity-feed plastic cup for smooth, efficient spraying.
The AirCraft SG H827-01 HVLP spray gun is built for controlled, consistent ..
R 538.78
Ex VAT:R 468.50
Model: SG H827-11
PLIABLE WASHER FOR H827....
R 23.92
Ex VAT:R 20.80
Model: SG H827-18
AirCraft Fluid Nozzle Joint SG-H827-18 For SG-H827 Spray Gun
At a Glance: Threaded fluid nozzle joint/connector that helps secure and seat the nozzle assembly for a proper seal and stable spray output.
The AirCraft SG-H827-18 Fluid Nozzle..
R 80.73
Ex VAT:R 70.20
Model: SG H827K
HVLP spray gun kit - 1.4mm
The success behind an HVLP spray gun, is the low amount of overspray.
This is
achieved by having an improved atomization, by using a lower air pressure and a
higher volume of airflow.
Included in kit:
..
R 957.95
Ex VAT:R 833.00
Model: SG H887MINI
HVLP touch up spray gun - 0.5mm
The success behind an HVLP spray gun, is the low amount of overspray.
This is
achieved by having an improved atomization, by using a lower air pressure and a
higher volume of airflow.
HVLP - High Vo..
R 622.15
Ex VAT:R 541.00
Model: SG HL01
Airbrush holder - table edge clamp
Holds up to 4 airbrushes and clamps to a table edge.
Includes bracket to mount an inline air regulator.
Suitable for all kinds of
airbrushes.....
R 354.78
Ex VAT:R 308.50
Model: SG HL02
Airbrush holder - table top with suction feet
Holds up to 4 airbrushes at a time.
The steel base has 4 suction cups to secure it on a smooth table top.
Suitable for all kinds of
airbrushes.....
R 354.78
Ex VAT:R 308.50
Model: SG L897-01
AirCraft Nozzle Kit 1.7mm For L897 Spray Gun (SG L897-01)
At a Glance: Complete 1.7mm nozzle set (air cap, fluid nozzle and needle) to refresh spray pattern and atomisation.
The AirCraft SG L897-01 Nozzle Kit 1.7mm is the go-to replacement set ..
R 714.73
Ex VAT:R 621.50
Model: SG LM3000-SK06
AirCraft Service Kit Trigger Only For LM3000 Spray Gun (SG LM3000-SK06)
At a Glance: Trigger-only service kit with replacement pin and washers/bushes to restore smooth, tight trigger movement.
The AirCraft SG LM3000-SK06 Service Kit is the quic..
R 269.68
Ex VAT:R 234.50
Model: SG LM3000-SK07
AirCraft Replacement Spray Gun Body For LM3000 Spray Gun (SG LM3000-SK07)
At a Glance: Replacement LM3000 spray gun body (gun frame/housing) for restoring fitment, alignment and reliable operation.
The AirCraft SG LM3000-SK07 is a replacement s..
R 309.93
Ex VAT:R 269.50